Build a Crumpled Watershed Model

This activity is borrowed from the University of Nebraska - Lincoln Extension. Find more of their stormwater activities for kids at www.water.unl.edu
In this activity, you can make a watershed model. Remember, a watershed is all the land that "sheds" water from rain and snowmelt into a specific stream, river, or lake. The boundaries of a watershed are the mountains, hills, or other high points where land slopes towards that water. Watersheds can be very small or very large. A large watershed may have many smaller watersheds. It's like the branches of a tree. The tiny twigs join bigger twigs, the bigger twigs join larger branches, and the branches join the trunk. Small streams flow into larger streams, larger streams flow into rivers, and rivers flow into larger rivers or even gulfs, seas, and oceans.
Everyone lives in a watershed

How to build your watershed


  1. Take one sheet of paper and crumple it up in your hands.
  2. Then open up the paper, but do not flatten it. You want it to have some "relief" - some high and low places. The high places are hills, the low spots are valleys, the wrinkles are streams and valleys.
  3. With a blue marker, draw on the paper where you think the streams and rivers would be.
  4. Check to see if you are right. Place the paper on a tray or newspapers or towels. With the spray bottle, make it rain in the watershed. Squirt a fine mist over the watershed model, enough to make water flow down the "hills." Did you draw the streams and rivers in the right places? Do you have a lake? This is how watersheds function, the water is shed by the land into streams, rivers, and lakes.
  5. Now do the same thing with the second piece of paper - crumple it, then open it up but not too much.
  6. Draw the streams and rivers with the blue marker. Maybe include a lake or two.
  7. Next, use a brown marker and draw along the tops of the hills. With a green marker you can draw in trees, grass, crop or pasture land. Use a red marker to draw towns, houses or businesses.
  8. Place the "watershed" on a tray or newspapers or towels and squirt it with water. You'll see streams again. But now you'll see a lot of other stuff (colors) running into the streams along with the water. If this were a real watershed, the brown could be dirt from bare soil, the green could be grass clippings or leaves, and the red could be oil from leaky cars or fertilizer someone spilled on a driveway. That's what happens when things on the ground are picked up by stormwater runoff, they end up in streams and rivers and moving down the watershed.
  9. Be sure to clean up when you are finished with your watershed models.